|
|
|
DH416
The DH416 is a single channel thysistor dimmer (leading edge) suitable for tungsten. tungsten halogen, wire wound (inclusive) fed low voltage tungsten or neon loads.
Supply Voltage: 180-264VAC
Supply Frequency: 48-52 or 58-62Hz
Maximum Load: 16A
Output Relay: Single Pole 16A
Product Dimensions: 274mm x 200mmm x 72mm
Finish: N/A
|
|
DH452
The DH452 is a 1Kw universal leading/trailing edge dimmer suitable for tungsten halogen. DIN-rail mounted and only 70mm wide.
Finish: N/A
|
|
DH472
The DH472 is a Dali to 1-10V/DSI Converter designed to control electronic ballasts which complies with EN 60929 and ballasts which comply with the DSI standard. For 1-10V control the converter can switch maximum 15 HFC/CHFC/sc ballasts, an external contractor should be used for more ballasts. Controls up to 50 DSI/1-10V ballasts.
Finish: N/A
|
|
DH494
The DH494 Relay Unit is a DIN-rail mounted unit that can control four individually programmable relays. The relays are 'normally open', volt free and can switch up to 10A resistive loads. DIN-rail mounted and only 88mm wide.
Finish: N/A
|
|
DH490
The DH490 Blinds Controller is a DIN-rail mounted unit that provides two independent control channels each with two single pole, volts free contacts for switching up to 550W up/down or power direction motors. DIN-rail mounted and only 88mm wide.
Finish: N/A
|
|
DH444
The Mini Input Unit is a fully DALI compatible interface, designed to allow customer specified switches, sensors, time clocks or other on/off control devices to be incorporated into a DALi lighting control system.
Key Features
-Pre-configured with three scene recall and one touch dimmer inputs.
-Fits into all standard size back boxes and architrave style back boxes.
-Touch dimming with a momentary or latching switches.
Finish: N/A
|
|
DH402
The DH402 Power Supply is a fully DALI compatible 250mA. The power supply is a DIN-rail mounted unit. Note: If a power supply unit is connected to the system, no other source of power may be used. DIN-rail mounted and only 35mm wide.
Finish: N/A
|
|
DH312
The multi-sensor module is a compact unit containing the sensors required to provide the energy saving benefits of an automated lighting control system. It contains a constant light sensor, a PIR presence detector and an infrared receiver that allows the multi-sensor to be operated by the IR remote control. (DH303)
The PIR and constant light sensors allow the system to detect when a room is occupied and to measure the levels of light available.
The IR receiver operates in conjunction with the IR held remote control to select desired light levels and to carry out basic system programming functions.
The multi-sensor can be installed in the ceiling or within a luminaire. It can also be fitted with a local wall switch, which will provide a manual dimming function if required.
Finish: N/A
|
|
DH491
Single channel relay unit for integration in luminaries or electrical cabinets. Designed to allow control of switched loads.
Finish: N/A
|